• Home
  • PR TACTICAL NEWS
  • About
    • Capabilities Statement
    • Business Profile
  • Public Safety Agencies & Training
    • Press Release for PR-Pyro™ Mini Blast
    • Press Release For RPG Simulator System
    • Press Release for Munitions & Equipment Line Additions
    • Press Release: PRTC INC. CREATES DYNAMIC PYROTECHNIC BOOBY TRAP TRAINING SIMULATORS
    • PR-RPG2HX Training Device
  • Products
    • EOD Products
    • Ground Fired Munitions
    • Launchable Munitions
    • Firing Systems
    • Accessories
    • New Products
  • Purchase & Contact

Firing Systems, Ground Fire Munitions, & EOD Products! (936) 443-3279 or (713) 494-1836

sales@opformunitions.com
PR TACTICAL CORPORATIONPR TACTICAL CORPORATION
PR TACTICAL CORPORATION
  • Home
  • PR TACTICAL NEWS
  • About
    • Capabilities Statement
    • Business Profile
  • Public Safety Agencies & Training
    • Press Release for PR-Pyro™ Mini Blast
    • Press Release For RPG Simulator System
    • Press Release for Munitions & Equipment Line Additions
    • Press Release: PRTC INC. CREATES DYNAMIC PYROTECHNIC BOOBY TRAP TRAINING SIMULATORS
    • PR-RPG2HX Training Device
  • Products
    • EOD Products
    • Ground Fired Munitions
    • Launchable Munitions
    • Firing Systems
    • Accessories
    • New Products
  • Purchase & Contact

Ground Fired Munitions

Ground Fired Munitions

VIEW PURCHASING INFO

*click image to enlarge*

PR-Pyro Line Rocket

READ MORE HERE

# PR-Pyro Line Rocket

Features:

  • REALISTIC RPG ROCKET PERFORMANCE
  • FOAM NOSECONE FOR SOFTER IMPACT
  • ELECTRIC MATCH IGNITION
  • ROCKET IMPULSE 10.00 N-SEC
  • THRUST DURATION 1.6 SEC

 

Dimension:

  • Overall Length -14.5 inches
  • Tube – 1in (D)
  • Nose cone – 6 in (L) x 3 in (D)

 

DOWNLOAD SPEC SHEET

Also available:

  • TIGHTENER
  • KEVLAR LINE

*click image to enlarge*

PR Flash Bang Training Grenade

READ MORE HERE

PR FLASH BANG TRAINING GRENADE

Model#: PR-FBT-MK 4

  • NO TIME DELAY (FIRES ON IMPACT WITH FLOOR OR WALL)
  • NO FUSE (IMPACT FIRED BY INERTIA)
  • NOT ATF REGULATED. FOR TRAINING PURPOSES
  • NO FRAGMENTATION

REUSABLE
Stays Where It Is Thrown

Dual Output Modes:
120dB or 180dB
* Made In U.S.A *


DOWNLOAD SPEC SHEET

* Increased Impact Strength from 100% 4140 chrome moly heat treated body.
* Increased abrasion resistance from full melonite nitride finish.
* Quick lock Acme threads for 300% more thread engagement with fewer turns.
* No time delay fuse-Fires on impact with any hard surface.
* Output of 120 dB or 175 dB, 4 psi over pressure, & bright flash.
Less smoke than ATF regulated devices.
For Public Safety and Military Training ONLY, not for entertainment or casual use.

WARNING: The PR-FBT Mark 4 training device is potentially dangerous if used improperly.

It can produce dangerous sound levels of up to 180dB, and all users and trainees MUST have adequate hearing protection on when using the full power blanks.
All users and trainees must wear eye protection.
While the device does not fragment, it produces approximately 4 psi overpressure and can send sand, gravel, dirt and floor debris several feet from the point of blast.
This device is for public safety, and military training only. It is not a toy and must be used by experienced and qualified tactical training personnel only.

PRIMER operation: Produces 120dB sound and small flash.
Users must practice with primer before using the full power blanks.

Never throw the device directly at any person!
209 Primer use:
-Insert the black primer holder in the lower half of the device.
-Insert a 209 primer into the holder and screw the top half back on.
-To deploy, grasp the device in the throwing hand with the spoon in the web of the hand aligned with the knuckles.
-Pull the safety pin with the off hand and hold on to it. DO NOT THROW THE PIN AWAY.
-Throw the device into the room so that it hits the floor, wall, or other HARD object.
-The device will fire on impact with a hard object. There is NO TIME DELAY. It is fired by the inertia firing pin on impact with any hard object.

FULL POWER BLANK operation: Produces 170-180 dB sound, bright flash, and 4 psi overpressure.

-Never throw the device directly at any person!
-Full Power Blank use:
-Insert a full power blank cartridge into the lower half of the body and screw the top half back on.
-To deploy, grasp the device in the throwing hand with the spoon in the web of the hand aligned with the knuckles.
-Pull the safety pin with the off hand and hold on to it. DO NOT THROW THE PIN AWAY.
-Throw the device into the room so that it hits the floor, wall, or other HARD object.
-The device will fire on impact with a hard object. There is NO TIME DELAY. It is fired by inertia firing pin on impact with a hard object.

*click image to enlarge*

PR Pyro Magnum IED

READ MORE HERE

Magnum IED Simulator

DOWNLOAD SPEC SHEET

Model # PR-Pyro-Magnum IED

  • Firing system: Electric Match
  • Dimensions: 10” tall x 4” diameter
  • Body Material: Fiberboard
  • Noise Level: Very Loud (approximately 165 dB)
  • UN Number: 0431
  • Hazard Class: 1.4G
  • Minimum Standoff: 5 meters
  • Discharge Characteristics: Upon firing, the device emits a very loud blast, moderate flash, and smoke form the top of the tube. It does not explode; there is no fragmentation.
  • Suggested Applications: Outdoor IED, Roadside Bomb, Vehicle Borne IED. Use with other PR-Pyro munitions to vary the dramatic effect.
Military Training RPG Simulator

*click image to enlarge*

PR-RPG2-HX Launcher Simulator

READ MORE HERE

PR-Pyro™ RPG Launcher Simulator

Model Number: PR-RPG2-HX

Weight: 11 lbs ( 33 lbs in case )
HDPE Construction
No Back Blast
Munition Range: 75 meters
Rugged Construction

Will Only fire PR-Pyro Training MunitionS:
RPG1-HX – Report Only
RPG2-HX – Report & Tracer
RPG3-HX – Tracer Only
RPG4-HX – Squib Load, Muzzle Signature Only


DOWNLOAD SPEC SHEET

Working replica of the infamous RPG-7 launcher; fires 4 types of PR-Pyro munitions.

Upgrade tubes available:
38mm, 50mm, or 60mm

The PR-Pyro™ RPG munitions are fired from the PR-RPG2-HX. There are four 30mm versions and one 38mm version. PR-Pyro™ 1N, 2N, 3N, and 4N are fired from the 30mm rocket tube that comes standard with the RPG simulator. The Magnum RPG3S is fired from the optional 38mm rocket tube. There are four 30mm RPG simulators currently available; three (1N-3N) fire a projectile and one (4N) is a blank. The RPG projectiles have an average range of 75 meters. RPG-1N fires a report charge (bombette) only; it produces a loud blast after 1.5 seconds flight. RPG-3N is a comet only. The comet leaves a familiar smoking trail for its entire flight and burns out in the air leaving no residue.

The RPG-2N is a combination of both comet and bombette and is our most popular RPG munition. It flies approximately 75 meters leaving a smoking trail and explodes with a loud bang after 1.5 seconds.

The RPG-4N fires from the rocket tube with a muzzle signature only. The 4N is popular with training venues that are restricted for safety reasons to a “no untethered projectiles” policy. The RPG-4N can also be a very realistic effect when used with other PR-Pyro™ munitions to set up a hit zone on a building or vehicle. The target is already set up with the blast pyro and is “blown up” in conjunction with the RPG shot.

The Magnum RPG-3S is a comet only projectile with a range of about 150 meters. It leaves a distinct smoking trail and burns up in the air.

Suggested uses: RPG shots, SAM shots, long range mortar hits.

*click image to enlarge*

PR-Pyro™ Concussion Pack

READ MORE HERE

PR-Pyro™ Concussion Pack

Model Numbers:
PR-Pyro™ C1 (Small, 3 gm)
PR-Pyro™ C2 (Medium, 6 gm)
PR-Pyro™ C3 (Large, 9 gm)
PR-Pyro™ C1S (With Sparks, Small, 3 gm)
PR-Pyro™ C2S (With Sparks, Medium, 6 gm)
PR-Pyro™ C3S (With Sparks, Large, 9 gm)
Firing System: 6-foot Electric Match
Noise level:
Small- 120 dB
Medium- 140 dB
Large- 160 dB
UN Number: 0431
Proper Shipping Name: Articles, Pyrotechnic
Hazard Class: 1.4G
MSD: 3 meters
Package type: 1.4G
Discharge Characteristics: Upon firing, mylar bag explodes with flash and loud bang (and sparks on S models). No fragmentation

DOWNLOAD SPEC SHEET

The PR-Pyro Concussion Packs are a convenient way to set up bullet strikes or other multi shot scenarios. They come in three sizes and two compositions. Sized small, medium, and large, with or without sparks, they make excellent small IEDs, bullet shots, or distractions. They are small plastic bundles that can easily hidden or camouflaged. The small and medium concussion packs are ideal for indoor scenarios such as booby traps, or gun shots in an active shooter training session. The large concussion packs are more appropriate for outdoor use, but there is no dangerous fragmentation from any size. They can be used in close proximity to personnel safely.

*click image to enlarge*

PR-Pyro IED 1N Simulator Munition

READ MORE HERE

IED 1N MUNITION SIMULATOR

Model # : PR-Pyro IED 1N Simulator Munition

* Sold to only U.S. Military, Public Safety Agencies and Training Contractors in support of Military operations.

Firing System: Electric Match
Dimensions: 7” x 1.375”
Body Material: High Impact Polystyrene (HIPS)
Noise Level: 130 dB
UN Number: 0431
Hazard Class: 1.4G
Package Type: 4G Fiberboard
Minimum Standoff Distance: 5 Meters
Discharge Characteristics: Upon firing the device emits a loud bang, bright flash, and a plume of smoke from the top of the tube with NO FRAGMENTATION. Does Not Explode


DOWNLOAD SPEC SHEET

PR Pyrotechnics can be safely discharged in close proximity to personnel and equipment. They can be shipped Fedex or other commercial carrier.

The PR-Pyro IED-1N improvised explosive device simulator is the benchmark product in the PR Tactical Corporation’s OPFOR Munitions & Equipment line of realistic battlefield special effects (BFX). It is designed to be a very versatile device that can be set up almost anywhere the trainer needs a blast, flash and smoke signature. It can be used as a single munition or in pods of 2-5 to create the illusion of a roadside IED, bomb blast, or RPG strike. The IED-1N has been used by U.S. military trainers, government agencies, and training contractors since 2007 with great success. Upon firing, the IED-1N will produce a loud blast, bright flash and plume of smoke without any fragmentation. It is safe and reliable and can be initiated by any of the PR firing systems. Use the IED-1N in combination with other PR-Pyro munitions such as smoke or Claymores to get realistic simulated explosions. The IED-1N will fire vertically or horizontally and can be used as a vehicle borne IED (VBIED) in the bed or trailer hitch of a truck. Standoff of five meters will give trainees a realistic battlefield experience even with their required hearing and eye protection. They will hear it, see it, and smell it, but they won’t get hurt. Due to the size and height of the blast, the PR-Pyro IED-1N is not recommended for indoor use. Suggested uses: road side bombs, bomb hits, VBIEDs, trip wire (outdoors), building or vehicle hits.

Use in pods of 2 or more

Use with claymore

 

*click image to enlarge*

PR-Pyro Mortar Simulator Munitions

READ MORE HERE

MORTAR MUNITIONS

Model #: PR-Pyro Mortar 1N, 2N & 3N

Firing System:
Electric match
Diemsions:
7 1/4” x 1 1/4”
Body material:
High impact Polystyrene
Noise level:
Report 140dB whistle 120dB
Un Number: 0431
Dot Hazard class: 1.46
Minimum Standoff: 5 meters


DOWNLOAD SPEC SHEET

1N- REPORT ONLY
Loud aerial blast 140 dB in 1.5 sec.
Range: 50M

2N-WHISTLE & REPORT
Loud whistle with 140 dB report in 1.5 sec.
Range: 50M

3N-WHISTLE ONLY
Loud whistle for 2 sec. No report

The new PR Tactical ground mortar simulator munitions are now packaged in the same high impact polystyrene material as our benchmark IED-1N munitions. They are lightweight and weather resistant. The Mortar 1N, 2N, and 3N simulator munitions can be set up to fire over the heads of trainees or their vehicles and can be fired remotely using all PR firing systems. They will fit into all the PR Tactical simulator stands, or they may be set up in the ground or on buildings or vehicles.

Three styles give the trainer flexibility in staging the battlefield special effects (BFX) he desires for the most realistic training. The 1N style fires a report charge 50 meters up with very little traceable signature. The 1N fires its bombette 1.5 seconds after launch and yields a loud blast with no fragmentation. The 3N fires its whistle straight up and last for approximately 2 seconds with no report. The 2N is a combination whistle and report charge that sounds just like incoming bombardment. The 2N report yields the same blast as the 1N. Range is approximately 50 meters straight up. Use separately or in combination with other PR-Pyro™ battlefield special effects simulator munitions.

Suggested uses: Mortar hits above ground.

*click image to enlarge*

PR-Pyro™ Smoke

READ MORE HERE

SMOKE

PR-Pyro Smoke Munitions

UN Number: UN 0197
Proper Shipping Name:
Signals, Smoke
Hazard Class: 1.4G
Smoke Color: White/GrayPR-Pyro Smoke Munitions contain no Perchlorates.

 

DOWNLOAD SPEC SHEET

PR-Pyro HV Smoke E
High Volume Smoke Device
Electric ignition
Approx 6 min burn time
500,000 cubic feet of smoke
Size 4” x 6.75”
Shipping wt: 5 lbs, 6 per case

 

PR-Pyro Smoke P
White Smoke
Pull ring ignition
2-3 min burn time
130,000 cubic feet of smoke
Size 2.5” x 5”, 32 per case

 

PR-Pyro Smoke E
White Smoke
Electric ignition
2-3 min burn time
130,000 cubic feet of smoke
Size 2.5” x 5”, 32 per case

 

NEW ITEMS

 

TSG1a

PR-Pyro TSG1
White Smoke
Pull ring ignition
25,000 cubic feet of smoke
Size 1.75” x 4”

IMG_9454new

PR-Pyro LV Smoke
White Smoke
Electric ignition
40,000 cubic feet of smoke
Size 1.75” x 4”

PR-Pyro HV Smoke

*click image to enlarge*

PR-Pyro™ Claymore Munition

READ MORE HERE

PR-Pyro™ Claymore Munition

Model # : PR-Pyro C1

Firing System: Electric Match
Dimensions: 3″ in x 3.25″ in
Weight: 12oz
Body Material: Fiber Board
Noise level:  Medium
UN Number: 0431
Proper Shipping Name: Article, Pyrotechnic
Labels Required: 1.4G
Tube Color: Black
Minimum Standoff Distance: 5 meters

DOWNLOAD SPEC SHEET

The PR-Pyro-C1 claymore simulator munition produces a superior visual battlefield special effect (BFX). Upon discharge it throws pyrotechnic sparking material approximately 20 feet in the air and emits a strong smoke cloud. The sparks spread out at the top to create the illusion of a much larger explosion. Although the claymore munition does produce modest bang, it is not very loud. The PR-Pyro-C1 is best used in conjunction with other PR-Pyro concussion simulators such as IED1N, Mini-IED, or IED2L to create a more robust BFX event. A combination of one C1 claymore and three IED1N simulators fired from the PR-SIM3 stand creates an impressive explosion illusion  that can be seen by aircraft crews or drones at altitude.

Suggested uses: road side bombs, bomb hits, VBIEDs, best used with IED1N or Mini- IED

*click image to enlarge*

PR-Pyro™ AAA Battery

READ MORE HERE

AAA Battery

Model #: AAA Battery

Simulates anti-aircraft artillery fire or multiple rocket launcher fire. Fires white, red or green tracer comets that burn out in flight.


DOWNLOAD SPEC SHEET – 22mm
DOWNLOAD SPEC SHEET – 30mm

22mm
• 60-shot Battery in four 15-shot plates
• Fires 15 shots in 8 seconds
• Range: 200 v ertical feet
• Dimensions: 5.25” wide x 17” long x 4” tall
• DOT Hazard Class: 1.4G, UN 0431, Articles, Pyrotechnic
• Firing System: Electric match

30mm
• 10-shot plates
• Fires 10 shots in 5 seconds
• Range: 300 v ertical feet
• Available in 10-shot plates sold separately
• Dimensions: 15” wide x 21” long x 5” tall
• DOT Hazard Class: 1.4G, UN 0431, Articles, Pyrotechnic
• Firing System: Electronic match

*click image to enlarge*

PR-Pyro™ Ground Launcher

READ MORE HERE

Ground Launcher


Model #: PR-Pyro Ground Launcher

• OPFOR Portable Mortar / Qassam Rocket Launcher
• Fires all sizes of PR-Pyro Launchable munitions
• RPG – 30mm & 38mm / SAM 50 mm & 60 mm
• with interchangeable insert tubes.
• Comes with PR-HB15 handheld firing system
• Adjustable for stability and angle of fire
• Shipped in heavy duty storage case


DOWNLOAD SPEC SHEET

Interchangeable Insert Tubes

30mm, 38mm, 50mm, 60mm Munitions

Heavy Duty Shipping & Storage Case

*click image to enlarge*

PR-Pyro™ Mini Blast Munition

READ MORE HERE

PR-Pyro™ Mini Blast Munition

Model Numbers:
PR-Pyro™ Mini Blast
Model Number: PR-Pyro™ Mini Blast
Firing System: Electric Match, 3 meters
Dimensions: 1” x 2”
Body Material: Laminated Paper
Noise level: 130-140 dB
Min. Standoff Dist: 5 meters
Proper Shipping Name: Articles, Pyrotechnic
Hazard Class: 1.4G, UN 0431
Discharge Characteristic: Upon firing, this device deflagrates completely with a loud bang. Shoot 2, 3 or more together for a larger effect.The PR-Pyro-Mini Blast is very loud exploding IED simulator that can be used in a variety of training scenarios. The Mini Blast is wax coated for waterproof deployment in any weather. It can be used individually or in groups to magnify the effect. Bury them 6 inches in the ground, cover them with screened dirt, Fullers Earth or sand for a cannonball effect. They can also be used to magnify the sound of any of our battlefield special effects (BFX). They are very powerful and do explode, so use with extreme caution.

DOWNLOAD SPEC SHEET

 

Mini Blast

 

*click image to enlarge*

PR-Pyro™ Mini IED

READ MORE HERE

Mini IED Simulator Munition

Model # : PR-Pyro Mini IED

Firing System: Electric Match
Dimensions: 3.25″ L x 1″ diameter
Body material: Laminated fiber
Noise Level: 140dB
UN Number: 0431
Proper Shipping Name: Articles, PyrotechnicDischarge Characteristics:
Emits a 3 ft. high bright flash and rolling ball of smoke from discharge end with a loud bang.


DOWNLOAD SPEC SHEET

 

*click image to enlarge*

PR-Pyro™ COLORED SMOKE

READ MORE HERE

Colored Smoke

PR-PYRO™ Smoke, Red / Black / Blue / Green / Violet / White / Yellow / Orange

* 90 second burn time, high output
* NO FLAME HAZARD-all burning is internal
* Works vertical or horizontal
* For outdoor use only
* Dimensions: 2.25 in diameter x 8.25 in long.

DOWNLOAD SPEC SHEET

 

*click image to enlarge*

PR-Pyro™ Fire Bomb Simulators (CURRENTLY UNAVAILABLE)

READ MORE HERE

FIREBOMB SIMULATOR

• Model Number: PR-Pyro FB1 Small
• Model Number: PR-Pyro FB2 Medium
• Model Number: PR-Pyro FB3 Large
Spectacular fireball simulates incendiary IED for dramatic and realistic battlefield effect.
Firing System: Electric Match
Body Material: Plastic
UN Number: 0431
Proper Shipping Name: Articles, Pyrotechnic
Hazard Class: 1.4G

DOWNLOAD SPEC SHEET

PR-PyroT M FB1

PR-Pyro FB2

PR-PyroT M FB3

 

 

 

 

 

 

 

The PR-Pyro Firebomb simulators are useful as an outdoor Battlefield Special Effect (BFX). Upon initiation by the electric match the firebomb simulator will explode with a bang and produce a bright orange fireball and thick black smoke, which quickly dissipates in the wind. The burning naphthalene may continue to burn for a short period before burning out, and the only debris is the plastic container, which usually is ejected in one or two pieces near the site of the blast.

They are ideal for use as IED or vehicle bomb strikes. They come in three sizes: ½ kilo FB1, 1 kilo FB2, and 2 kilo FB3. The bursting charge and electric match comes already installed. These are a fire hazard and must be used only by trained and certified personnel. The effect can be seen from combat altitude and is ideal for training aircrews.

Contact Us

We're currently offline. Send us an email and we'll get back to you, asap.

Send Message
REALISTIC TRAINING PYROTECHNICS FOR AMERICA'S MILITARY & PUBLIC SAFETY AGENCIES Learn More

Houston, TX

  • PR Tactical Corporation Inc.
  • Houston, Texas USA
  • (936) 443-3279
  • sales@opformunitions.com

About

PR Tactical Corporation creates realistic pyrotechnic training simulators, OPFOR equipment and firing systems for military units and public safety agencies. Our mission is to stress-inoculate war fighters and public safety personnel against the disorienting effects of explosions.

© 2019 · PR Tactical Corporation | All Rights Reserved

  • Home
  • PR TACTICAL NEWS
  • About
    • Capabilities Statement
    • Business Profile
  • Public Safety Agencies & Training
    • Press Release for PR-Pyro™ Mini Blast
    • Press Release For RPG Simulator System
    • Press Release for Munitions & Equipment Line Additions
    • Press Release: PRTC INC. CREATES DYNAMIC PYROTECHNIC BOOBY TRAP TRAINING SIMULATORS
    • PR-RPG2HX Training Device
  • Products
    • EOD Products
    • Ground Fired Munitions
    • Launchable Munitions
    • Firing Systems
    • Accessories
    • New Products
  • Purchase & Contact